Cone Crusher

PRODUCT INTRODUCTION

The fully hydraulic cone crusher is a new generation product jointly developed by our company's scientific research personnel and well-known German cone crusher experts. However, the HP multi-cylinder cone crusher on the market cannot compare with it in terms of service life, maintenance rate and performance stability.

The hot types are 3´ FT， 4.25´ FT， 5.5´ FT， 7´ FT, and the capacity often chosen by our customers are 30-50t/h, 50-100t/h, 100-200t/h. Tell us your needs such as the capacity and materials, and our technical people will prepare the quotation for you asap.

20-30mm、10-20mm、5-10mm、0-5mm

It can crush more than 100 kinds of rocks. The common discharge size is...

Features

Full hydraulic control, convenient and fast
The equipment adopts hydraulic adjustment discharge port, hydraulic protection and hydraulic cavity cleaning device, which has a high degree of automation, reduces downtime, saves the user's manpower and material investment, and greatly improves its reliability and life.

Adopt lamination crushing, the finished product has excellent particle shape
Through the special crushing cavity designed by the principle of intergranular lamination and the matching speed, the selective crushing of materials is realized, which effectively improves the proportion of fine materials and the content of cubes.

Simple structure and easy maintenance
The equipment is simple in structure and easy to operate, and all parts can be disassembled and repaired from the top or side, which makes the maintenance and repair of the equipment very convenient, saving time and effort.

Thin oil lubrication, improve service life
The unique thin oil lubrication system design and high-performance non-contact labyrinth seals are used without wear, which improves the reliability of blocking dust and greatly improves the service life of the equipment.

WORKING PRINCIPLE

LF large diameter impact crusher uses impact energy to crush materials. When the machine is working, the motor drives the rotor to rotate at a high speed. After the material enters, it collides with the blow hammer on the rotor to break, and then bounces from the counterattack liner back to the blow hammer action area to be broken again. This process is repeated, and the material is from large to small. Enter the first, second and third counterattack chambers for repeated crushing until the material is crushed to the required particle size and discharged from the discharge port. Adjusting the gap between the impact frame and the rotor can change the particle size and shape of the material.

Technical specifications