Double Roller Crusher

OVERVIEW

Feeding Size: ≤130mm

Processing Capacity: 10-125t/h

 

Some Basic Information of Double Roller Crusher

PG Double roller crusher is mainly used to crush material which is below the medium hardness, such as clinker mineral, coke, slag, shale, limestone and so on. It is the most suitable for small and medium non-metal mines and chemical industries to undergo secondary and fine crushing. It has the following features: simple structure, reliable performance, less flour.

 

The Main Features of Double Roller Crusher

1. Adaptable and flexible application

2. the use of wear-resistant materials,more durable

3. High production and high crushing efficiency

4. Equipped with dustproof and silencing device, zero dust and zero noise.

 

The Working Principle of Double Roller Crusher

The adjustment of discharging granularity: There is a wedge-shaped or gasket adjustment device between the two rolls, and on the top of the wedge-shaped device, there is an adjusting bolt. When the adjusting bolt pulls up the wedge, the wedge will lift the movable roll from the fixed roll, so that the gap between the two rolls will become large, and the discharging granularity will become large. When the wedge goes down, under effect of the pressure spring, the gap between the two rolls will become small, and the discharging granularity will become small. The gasket device adjusts the discharging granularity through increasing and decreasing the number or thickness of the gasket, and when the number of the gasket increases, the gap between the two rolls will become large and the discharging granularity will become large; when the number of the gasket decreases, the gap between the two rolls will become large and the discharging granularity will become small.

Model Roller Diameter(mm) Feeding Size(mm) Discharging Size(mm) Capacity(t/h) Power(kw)
2PG400x250 φ400 <25 ≤3 5-10 5.5x2
2PG450x500 φ450 <30 ≤3 8-20 7.5x2
2PG610x400 φ610 <30 ≤3 13-35 15x2
2PG610x750 φ610 <30 ≤3 16-40 22x2
2PG750x500 φ750 <30 ≤3 16-40 22x2
2PG800x600 φ800 <30 ≤3 20-40 30x2
2PG800x800 φ800 <30 ≤5 20-50 37x2
2PGY1000x800 φ1000 <30 ≤5 40-70 55x2
2PGY1200x1000 φ1200 <30 ≤5 60-100 90x2
2PGY1200x1200 φ1200 <30 ≤5 80-130 110x2
2PGY1500x1000 φ1500 <30 ≤5 100-150 132x2
2PGY1500x1200 φ1500 <30 ≤5 150-200 160x2
2PGY1800x1000 φ1800 <30 ≤5 220-300 200x2
2PGY2000x1200 φ2000 <30 ≤5 300-400 250x2
The above data are for reference only and are subject to specific conditions.