PCZ Heavy Hammer Crusher

PRODUCT INTRODUCTION

One-time molding, no secondary crushing and shaping process is required, the cost can be reduced by about 40%, and the energy consumption is low.

The heavy-duty hammer crusher crushes the material by the collision of the high-speed hammer body and the material. It has the characteristics of simple structure, one-time forming, large crushing ratio, small product particle size and high production efficiency. It can be used for dry and wet crushing. It is suitable for It is used for fine crushing of medium hardness and brittle materials in mining, cement, coal, building materials, combustion and other departments. The hammer crusher can adjust the gap between the hammer head and the lining plate according to the user's requirements, and change the discharge particle size to meet the different crushing needs of different users, and is very popular among domestic and foreign users.

20-30mm、10-20mm、5-10mm、0-5mm

It can crush more than 100 kinds of rocks. The common discharge size is...

Features

Reasonable gradation
Through three ingenious designs such as three counterattack zones, self-flow of finished materials, and adjustable trans-liners, the finished materials have reasonable gradation and low powder production, which can meet the diverse requirements of customers.

Easy maintenance
Eight-way hammer shaft hole, four-way spare, the body is equipped with an observation door, which is convenient to observe the operation. It is equipped with a hydraulic shaft puller, which is convenient for replacing the hammer head and hammer shaft.

Well made
All key components are protected by parts, processed by modern machinery and equipment such as gantry milling and presses, and a product technology department has been established to continuously improve processing technology and product quality.

Self-flow tank design, small powder yield
Leave a gap on the adjustable counterattack plate in the third counterattack zone, so that the material with a diameter smaller than the gap can flow out naturally, avoiding re-crushing, and greatly reducing the powder production rate while increasing the production capacity. It is an alternative to traditional Optional product for impact crusher.

WORKING PRINCIPLE

The electromotor drives the rotor to rotate with high speed in the crushing chamber. The materials are fed into the machine from the upper feeding mouth and are crushed under the hitting, impacting, cutting and grinding of the hammer which is moving with high speed. On the bottom of the rotor, there is sieve plate and the crushed materials that is smaller than the screen size are discharged from the sieve plate, and the coarse particles bigger than the screen size are retained on the sieve plate to be hit and ground again by the hammer and finally be discharged from the machine from the sieve plate.

Technical specifications