As an important equipment for coarse crushing in the crushing process, jaw crusher is one of our core products, and it is also a product with a long history in the company's production. Over the years, we have been focusing on the R&D and manufacturing of high-performance crushers, supported by several customers on site. The products have undergone several iterative upgrades, and the introduction of more advanced European technology has condensed the CJ series jaws that are currently at a high level in the market. crusher. CJ series jaw crusher adopts innovative modularized, non-welded structure frame, high-quality alloy steel castings and rolling bearings, which greatly improves the fatigue resistance and operational reliability of the equipment, and fully guarantees the high output, High efficiency and low cost, a variety of flexible installation methods to meet different application options.
20-30mm、10-20mm、5-10mm、0-5mm
It can crush more than 100 kinds of rocks. The common discharge size is...
Features
Reliable equipment operation
Greater fatigue resistance, higher reliability, and longer service life provide a good operating environment for the equipment.
High output and crushing ratio
The crushing ratio is large and the operation is stable, which fully guarantees the high output and high efficiency of the crushing operation.
Easy maintenance
The operation is simple and the adjustment is quick, which reduces the maintenance cost and labor cost of the equipment.
The adjustment of the discharge opening is quicker and more convenient
Discharge port gasket adjustment, simple, reliable and easy to maintain.
WORKING PRINCIPLE
The motor drives the belt and pulley, and the movable jaw moves up and down through the eccentric shaft. When the movable jaw rises, the angle between the toggle plate and the movable jaw is When the movable jaw goes down, the angle between the toggle plate and the movable jaw becomes smaller, and the movable jaw is on the tie rod. Under the action of the spring, it leaves the fixed jaw plate. At this time, the crushed material is discharged from the lower opening of the crushing cavity. With the continuous rotation of the motor, the crushing jaws do periodic motion to crush and discharge materials to achieve mass production.
Technical specifications
| Model |
Feeding Size(mm) |
Discharge Gatesize (mm) |
Capacity(t/h) |
Motor Power(kw) |
Overall Dimension(mm) |
| PE150×250 |
≤130 |
15-45 |
1-4 |
5.5 |
896×745×935 |
| PE250×300 |
≤150 |
15-55 |
3-6 |
7.5 |
1050×987×1000 |
| PE250×400 |
≤210 |
25-60 |
5-20 |
15 |
1215×1520×1030 |
| PE400×600 |
≤350 |
40-90 |
15-60 |
30 |
1650×1588×1050 |
| PE500×750 |
≤425 |
50-100 |
40-110 |
45 |
1956×1918×1920 |
| PE600×900 |
≤500 |
60-125 |
90-180 |
55 |
2250×2733×2280 |
| PE800×900 |
≤600 |
80-140 |
100-220 |
75 |
2450×2950×2490 |
| PE750×1060 |
≤630 |
60-150 |
110-380 |
110 |
2531×2455×2783 |
| PE900×1060 |
≤700 |
100-160 |
230-390 |
110 |
2900×2657×2950 |
| PE900×1200 |
≤750 |
110-165 |
220-450 |
132 |
3100×2760×3260 |
| PE1000X1200 |
≤900 |
110-185 |
315-500 |
132 |
3200×2760×3260 |
| PE1200×1500 |
≤950 |
115-195 |
550-1000 |
220 |
3710×3446×4075 |
| PE1500×1800 |
≤1200 |
135-225 |
600-1200 |
280 |
5100×4700×4300 |
| PEX150×750 |
≤120 |
10-40 |
8-25 |
15 |
1310×1118×1145 |
| PEX250×750 |
≤210 |
15-50 |
15-35 |
22 |
1400×1751×1515 |
| PEX350×750 |
≤300 |
15-50 |
18-40 |
30 |
1485×1680×1648 |
| PEX250×1000 |
≤210 |
15-60 |
15-60 |
30 |
1550×1964×1380 |
| PEX250×1200 |
≤210 |
15-60 |
20-60 |
37 |
1530×1946×1380 |
| PEX300×1300 |
≤250 |
25-60 |
16-105 |
55-75 |
2000×2320×1730 |
