RIVER 80 amphibious excavator is designed for canal cleaning, wetland maintenance, and more. Equipped with advanced hydraulic attachments, high-strength track shoe cleats, and robust materials, this floating excavator ensures superior performance in challenging environments.
Features of 5-8 Ton Amphibious Excavator
- Suitable for 5-8 ton excavation
- Lightweight design for enhanced flexibility
- Equipped with high-strength track shoe cleats and rollers
- Durable hydraulic oil pipes and fittings
- Corrosion-resistant screws and wear pads
Descriptions of RIVER’s 5-8 Ton Amphibious Excavator
Our model RS80-A series amphibious excavators are suitable for 5-9 ton excavation, many of which are adopted for canal cleaning, waterway widening and wetland maintenance. Meanwhile they are often equipped with hydraulic attachments like pile hammer and clamps to meet wider application requirements. Additionaly, we could also increase two additional RC80-A pontoons on both sides to enable the amphibious excavator to travel through deep water area more safely.
Technical Specifications of RIVER’s 5-8 Ton Amphibious Excavator
River80 |
Parameter |
Unit |
a) Overall machine length |
7270 |
mm |
b) Overall machine width without side pontoons |
3000 |
mm |
c) Overall machine height(to boom) |
3300 |
mm |
d) Turntable width |
2070 |
mm |
e) Single pontoon length |
5750 |
mm |
g) Track shoe width |
780 |
mm |
m) Single pontoon height |
1300 |
mm |
f) Pontoon overall width |
3000 |
mm |
i) Track gauge |
2000 |
mm |
h) Distance between sprocket and idler |
5130 |
mm |
j) Counterweight ground clearance |
1435 |
mm |
k) Min ground clearance |
875 |
mm |
l) Max turning radius of the tail |
1800 |
mm |
River80 |
Parameter |
Unit |
L1) Max digging radius |
7550 |
mm |
L2) Max digging height |
9029 |
mm |
L3) Max digging depth |
4983 |
mm |
L4) Max unloading height |
7039 |
mm |
L7) Min turning radius |
1818 |
mm |
River80 |
Parameter |
Unit |
Pontoon Model |
RV80-3 |
/ |
Operating weight |
10600 |
Kg |
Boom and stick length |
6838 |
mm |
Bucket capacity |
0.21 |
m³ |
Engine model |
kubota V2607 |
/ |
Rated power/speed |
42.4/2000 |
Kw/rpm |
Max torque/speed |
225.8/1400-1800 |
Nm/rpm |
Displacement |
2.615 |
L |
Motor model |
TM10 |
Mottrol(Doosan) |
Output torque |
1000 |
N.m(kgf.m) |
Continuous pressure |
320 |
MPa(kgf/cm2) |
Driving speed |
2.9 |
km/h |
Swing speed |
10 |
r/min |
Gradeability |
《30° |
° |
Ground specific pressure |
18.5 |
kPa |
Bucket digging force |
51.4 |
kN |
Stick digging force |
26.7 |
kN |
Fuel tank volume |
130 |
L |
Hydraulic oil tank volume |
76 |
L |
Engine oil capacity |
10 |
L |
The above specification is based on XE75SL swamp excavator model with 7m long reach front, actual working range may vary from different excavator models.
Applications of RIVER’s 5-8 Ton Amphibious Excavator
Canal cleaning, waterway widening, and wetland maintenance are critical activities within the realm of aquatic and environmental management. The 5-8 ton amphibious excavator plays a pivotal role in enhancing efficiency and effectiveness across thoes applications.
- Canal Cleaning:
The amphibious excavator can efficiently remove silt, debris, and vegetation from canal beds, ensuring proper water flow and preventing blockages.
- Waterway Widening:
With its ability to navigate shallow waters and soft terrains, the excavator facilitates dredging to widen waterways, allowing smoother passage for vessels and enhancing flood control capabilities.
- Wetland Maintenance:
The excavator aids in restoring wetland habitats by clearing invasive species, creating wildlife-friendly environments, and managing water levels.